-
isolante dell'epossiresina
-
Isolanti medi di tensione
-
Isolante ad alta tensione dell'epossiresina
-
Interruttore sottovuoto
-
Boccola dell'epossiresina
-
Componenti elettriche dell'apparecchiatura elettrica di comando
-
trasformatore della resina della colata
-
Interruttore di messa a terra
-
Contatti elettrici di rame
-
Commutatore ad alta tensione di sconnessione
-
Limitatore di tensione dell'ossido di zinco
-
Fascette ferma-cavo industriali
-
Tubo elettrico della plastica del condotto
-
Indicatori ad alta tensione
-
interruttore modellato di caso
-
commutatore dell'interruttore del carico
-
Trasformatore di distribuzione di energia
-
StephanQiuPu è una grande fabbrica di energia elettrica. vi soddisfacciamo molto. coopererà ancora con voi!
24kV Epoxy Resin Wall Bushing Cross with Copper Busbar in Medium-Voltage Cabinet
| Materiale | Resina epossidica/resina per fusione | Colore | Rosso |
|---|---|---|---|
| Tensione nominale | 24KV | Tensione di frequenza | 68 kV |
| Distanza di dispersione | 380 mm | Altezza | 278 mm |
| Forza | 10KN | ||
| Evidenziare | 24kV epoxy resin wall bushing,medium-voltage cabinet copper busbar,epoxy resin bushing with cross |
||
24kV Epoxy Resin Wall Bushing Cross with Copper Busbar in Medium-Voltage Cabinet
The casing can be divided into five types according to the place of use: indoor common type, outdoor common type, outdoor type, outdoor type, outdoor-indoor high prototype and outdoor type.
The common type is generally suitable for the installation site within 1000 M above sea level.
The common type of outdoor home is generally suitable for the area with an installation site not exceeding 1000M above sea level, but the installation site should be a no-obvious area.
The outdoor indoor anti-fouling type is suitable for installation site not exceeding 1000M above sea level. For severe and heavy fouling area, 63kV oil paper capacitive perforating wall casing can be used.
The outdoor high prototype is suitable for the installation site below 3000 M.
An outdoor interior plateau anti-fouling type is suitable for the installation of the site below 3000m above sea level in the filthy area.
The casing can be divided into three types: aluminum conductor, copper conductor and non conductor(busbar type) according to the conductor material used .
| Current | Bus-bar |
| 630A | 90*20 |
| 1250A | 135*25 |
![]()
![]()
![]()

